精品在线一区-精品在线小视频-精品在线网站-精品在线视频一区-精品在线视频免费观看-精品在线视频免费

產品名稱：Case Integrity/Combustion Soundness Tester (FCS510) 案例完整性/燃燒完好性測試儀

Key Features

l  Derivative of our proven Production Line Flow Meter (FCO752)

l  Built-in automatic pressure control

l  Direct correlation to harmonised standards

l  Product specific parameters for optimum test set-up

l  Case and combustion testing in a single instrument

l 我們成熟的生產線流量計（FCO752）的衍生產品

l  內置自動壓力控制

l  與統一標準直接相關

l  產品特定參數，以實現最佳測試設置

l  單個儀器中的殼體和燃燒測試

The FCS510, derived from our proven FCO752 instrument is a unit which is specifically designed to comply with harmonised standards for the testing of Gas/Oil based Boiler systems. Benefitting from all of the standard features built into the FCO752, the FCS510 has automatic pressure control with variant specific optimisations allowing the test for each product type to run at maximum efficiency.

FCS510源自我們經過驗證的FCO752儀器，是專門設計用于符合基于氣/油鍋爐系統測試的統一標準的裝置。FCS510具有FCO752內置的所有標準功能，具有自動壓力控制和特定的變型優化，允許每種產品類型的測試以最高效率運行。

Case Integrity testing is carried out by introducing air into the flue outlet at a specific and regulated pressure and the resultant flow of air must be less than a specified limit dependant on the internal volume of the device. Missing or damaged case seals will result in excessive air flow and a fail result from the test. Correctly fitted and complete seals will restrict the air flow to below the specified limit and give a pass result.

通過在特定和調節的壓力下將空氣引入煙道出口進行殼體完整性測試，并且所得到的空氣流量必須小于取決于裝置內部容積的指定極限。殼體密封件丟失或損壞將導致過多的空氣流動并且測試失敗。正確安裝和完整的密封將限制空氣流量低于規定的限制并給出通過結果。

The FCS510 has 300 product and 300 test memory capacities which allows variant specific tests to be programmed for each model in your range. The built in barcode reader support and ability to store result data provides complete traceability against individually serialised products. The barcode reader input can be programmed by the user to demand product selection, serial number and even User ID before commencing a test. Combustion soundness testing is typically conducted using the same principles as the case integrity but at a higher pressure, not a problem for the FCS510 with its automatic pressure regulator and test specific rate control.

FCS510具有300個產品和300個測試存儲器容量，允許為您的范圍內的每個型號編程變體特定測試。內置的條形碼閱讀器支持和存儲結果數據的能力提供了針對單個序列化產品的完全可追溯性。在開始測試之前，用戶可以對條形碼閱讀器輸入進行編程，以要求產品選擇，序列號甚至用戶ID。燃燒完好性測試通常使用與殼體完整性相同的原理進行，但壓力較高，對于FCS510的自動壓力調節器和測試特定速率控制而言不是問題

上一篇:Valve Control Box (FCS539) 閥控箱（FCS539）

下一篇:Multi-Channel Sequence Box (FCS456) 多通道序列盒（FCS456）